11/27 mm heavy duty plastic eyelet with square shoulders.
Typically used for hole reinforcements in banners, tarpaulins, building wraps etc. Geometry and material optimised for High Frequency (HF) welding.
HF Welded PVC and plastic eyelets will fuse together with the foil and result in a joint that is significantly stronger and can withstand significantly higher pull forces than metal eyelet. This is especially true when working in mesh materials.
PVC and plastic eyelets will not tear out and will not rust and stain the material.
Plastic Eyelets can be colour matched to the fabric and will make recycling of banners and tarpaulins much easier.

Materials: PZ33, standard PVC compound, hardness 45+/-2 Shore D, PY28, modified for operating temperatures down to –20°C, hardness 51+/-2 Shore D. Available in PE too for PE based materials.

These components are manufactured in Denmark by Injection Molding, securing high quality, low unit prices, focus on sustainability and respect for the enveronmental impact of production.

Can be High Frequency welded using our electrode 07-402-0010, Ingen til PE

  • Material and geometry optimized for High Frequency (HF) welding
  • Delivered stacked for use in Carmo's (or 3rd party) automatic punch and welding machines
  • Variants on stock shipped worldwide within 5 businessdays
  • Available in versions for welding to PUR based materials
  • Produced in Denmark using quality materials and in respect of sustainability and work environment

Order# Material Color From stock Standard Pack Proper-
Use Comments In stock
('000 pcs)
04-275-1319 PELD
4 x 4.000
Bulk 1,750
04-275-1308 PVC
4 x 4.000
Bulk -
04-275-1368 PVC
80 x 175
Stacked 76,475
04-275-1311 PVC
4 x 4.000
Bulk 39,660
04-275-1305 PVC
4 x 4.000
Bulk 71,300
04-275-1357 PVC
80 x 175
Stacked 70,875
04-275-1360 PVC
4 x 4.000
Bulk -
04-275-1355 PVC
80 x 175
Stacked 43,925
04-275-1363 PVC
4 x 4.000
Bulk -
04-275-1324 PVC/PUR
4 x 4.000
Bulk -
04-275-1369 PVC/PUR
80 x 175
Stacked -

Mounts with
Related products
Customers also bought

All measurements and drawings are nominal. For exact measurements - and for critical integration - please contact sales for detailed drawings. Carmo is not responsible for misprints and technical changes.

Please note: Products in PVC are inherently susceptible to deformation due to elevated temperatures during storage and transportation. Carmo recommends storing and transporting components between 0 and 30 deg Celsius. In order to help minimise this risk, all Carmo products are shipped in extremely rigid cartons with a comparatively small number of parts per box.

(*) Smaller quantities can be delivered on request for a repacking fee.

(**) Stocklevels are indicative.