Line support suitable for inner liner bags, play equipment, inflatables etc. Typically used for attaching rope, wire or guy-line to tents, inflatable constructions etc. Rope/cord/shock cord up to Ø5 mm diameter can be fed through the hole.
Position the cleat on top of the sheeting and high frequency weld using the Carmo electrode. Alternatively, punch an oval hole in the substrate, feed the cleat through from the back and weld from the front. This gives the end product a ’lighter’ look.
These components are manufactured in Denmark by Injection Molding, securing high quality, low unit prices, focus on sustainability and respect for the environmental impact of production.
Can be High Frequency welded using our electrode 07-500-0125
See it in action
A plastic line-support is HF-welded onto PVC banner material, a strong, corrosion-free attachment bonded to the fabric rather than punched through it.
Most Carmo PVC components can be delivered in Carmo's special PVC/PUR mixture for HF welding to PUR substrates and foil. Please contact sales to investigate further and inquire about pricing and minimum order quantities.
Need a custom or modified version? Carmo Print Moulding delivers functional prototypes in days, and Engineering & Injection Moulding takes your concept to volume production.
- Material and geometry optimized for High Frequency (HF) welding
- Can be ordered in other colors and materials
- Produced in Denmark using quality raw materials from EU-based suppliers
Carmo A/S's quality management system is certified to ISO 13485:2016 Medical devices quality management system by Bureau Veritas (accredited by DANAK), certificate no. DK020611. Scope: Design, development, manufacture and assembly of injection molded plastic components. Valid: 2. September 2026 – 1. September 2029.
All Carmo plastic components are manufactured under the same QMS and procedures.
| Order# | Material | Color | From stock | Standard Pack | Proper- ties | Use | Comments | MOQ (pcs.) | In stock (pcs.) |
|---|---|---|---|---|---|---|---|---|---|
| 05-047-1001 | PVC | 1 x 400 | 400 | 14.125 |
Need a smaller quantity? Tell us how many you need. We may be able to repack for a fee, or refer you to one of our distributors.
| Mounts with | |
| Related products |
All measurements and drawings are nominal. For exact measurements - and for critical integration - please contact sales for detailed drawings. Carmo is not responsible for misprints and technical changes.
Please note: Products in PVC are inherently susceptible to deformation due to elevated temperatures during storage and transportation. Carmo recommends storing and transporting components between 0 and 30 deg Celsius. In order to help minimise this risk, all Carmo products are shipped in extremely rigid cartons with a comparatively small number of parts per box.
(*) Smaller quantities can be delivered on request for a repacking fee.
(**) Stocklevels are indicative.
