Home Home > Products > Grommets & Eyelets > Eyelets Oval and Square > 04-206

04-206 - Oval plastic Eyelet, Oval, 13/51 mm

Oval plastic Eyelet, Oval, 13/51 mm. Oval PVC eyelet with square shoulders for HF/RF welding to banners, tarpaulins, building wraps etc. 13 x 51 mm hole. Forms a lock with plastic cleat 05-646

Click for larger picture

Small technical drawing of 04-206 Oval plastic Eyelet, Oval, 13/51 mm

Nominal measurements in mm

 

Oval PVC/PUR eyelet with square shoulders and 13 x 51 mm elongated hole. Typically used for hole reinforcements in banners, tarpaulins, building wraps etc.
HF Welded PVC eyelets will fuse together with the foil and result in a joint that is significantly stronger and can withstand significantly higher pull forces than metal eyelet. This is especially true when working in mesh materials.
PVC eyelets will not tear out and will not rust and stain the material. They can be colour matched to the fabric and will make recycling of PVC and vinyl banners much easier.
Can be used together with plastic cleat 05-646 to form a lock.

Welding times of 1.5 seconds for single eyelets and 2-3 seconds for double eyelets are typical - depending on the HF generator used and the thickness and layers of sheets to weld.

Can be HF welded using our electrode 07-404-0010

  • Material and geometry optimized for High Frequency (HF) welding
  • Variants on stock shipped worldwide within 5 businessdays
  • Variants on stock available in small quantities
  • Available in versions for welding to PUR based materials
  • Available in versions with improved UV protection
  • Available in versions with extended temperature range

Download Productsheet
Download full catalog
Order# Material Color From stock Standard Pack Proper-
ties
Use Comments
04-206-3004 PVC
D.Grey
Delivered from stock
1 x 1.200
ShoreA > 90
Ultrasonic weldable
High Frequency (HF) weldable
Gluable using Carmo Seal
04-206-3015 PVC
Army
Produced to order - Call for quote
1 x 1.200
ShoreA > 90
Ultrasonic weldable
High Frequency (HF) weldable
Gluable using Carmo Seal
04-206-3010 PVC
Black
Produced to order - Call for quote
1 x 1.200
ShoreA > 90
Ultrasonic weldable
High Frequency (HF) weldable
Gluable using Carmo Seal
04-206-3016 PVC
Grey
Produced to order - Call for quote
1 x 1.200
ShoreA 80-90
Ultrasonic weldable
High Frequency (HF) weldable
Gluable using Carmo Seal
04-206-3003 PVC
L.Grey
Produced to order - Call for quote
1 x 1.200
ShoreA > 90
Improved low temp. performance
Ultrasonic weldable
High Frequency (HF) weldable
Gluable using Carmo Seal
04-206-3020 PVC/PUR
D.Grey
Produced to order - Call for quote
1 x 1.200
ShoreA > 90
Ultrasonic weldable
High Frequency (HF) weldable
Gluable using Carmo Seal








fits with:
05-646
Plastic Cleat, 23/25 mm Plastic Cleat, 23/25 mm
Plastic Cleat, 23/25 mm
mounts with:
Standalone
Standalone electrodes Standalone electrodes
Standalone electrodes
related products
04-134 04-204 04-205 04-403
Oval PVC Eyelet, 6/27 mm Oval PVC Eyelet, 6/27 mm
Oval PVC Eyelet, 6/27 mm
PVC Eyelet Oval, 9/42 mm PVC Eyelet Oval, 9/42 mm
PVC Eyelet Oval, 9/42 mm
Square plastic Eyelet, 24/43 mm Square plastic Eyelet, 24/43 mm
Square plastic Eyelet, 24/43 mm
Oval plastic eyelet,20/40 mm Oval plastic eyelet,20/40 mm
Oval plastic eyelet,20/40 mm
Customers also buy
03-601 06-926 03-645 05-247
Threaded plastic flange with internal thread G 3/4 Threaded plastic flange with internal thread G 3/4
Threaded plastic flange with internal thread G 3/4"
PVC glue - Carmo Seal PVC glue - Carmo Seal
PVC glue - Carmo Seal
Coin Groove Cap for weldable flange 03-601 Coin Groove Cap for weldable flange 03-601
Coin Groove Cap for weldable flange 03-601
Plastic Line Support, 11/64 mm Plastic Line Support, 11/64 mm
Plastic Line Support, 11/64 mm

All measurements and drawings are nominal. For exact measurements - and for critical integration - please contact sales for detailed drawings. Carmo is not responsible for misprints and technical changes.


(*) Smaller quantities can be delivered on request for a repacking fee.

 

Related Products

Snap Grommets
Eyelets, Round
Punch & welding eyelet machines
Eyelet setter tool

 


Contact sales

Steen Rasmussen
Tel.: +45 49 12 21 00
Fax: +45 49 12 21 99

... or send a request now!


Sign up to our newsletter
Customer story
Eyelets used for tens and awnings

Eyelets used for tents and awnings

"For 40 years Carmo has delivered quality and punctuality" - Isabella A/S

Read more…
Customer story
Carmo Eyelets used for high performance maritime equipment by Norwegian Nofi

Maritime equipment

"Carmo's components deliver the exact standard we are looking for"- NOFI Tromsø AS

Read more …
Case
Plastic eyelets from Carmo used in building wrap project in Hong Kong

Building wrap project, Hong Kong, using Carmo eyelets.

Case
Carmo Eyelets used for mounting ventilation ducts in mining

Carmo Eyelets used for mounting ventilation ducts

 
 
 
 

Carmo has a 60 year track record of delivering highly specialized technical and medical components.

We design, produce and sell quality injection moulded plastic components globally. We service industries as diverse as Medico, Maritime, Mining, Agriculture and Automotive.

Quality, Service and Flexibility are the key words of our production and in all aspects of our interaction with our customers. We are focused on minimizing hassle and maximizing service, while helping our customers turning ideas into products.

We are based in Denmark and run a highly automated production. By leveraging robotics and vision technology, we are able to deliver components with very high quality, well-defined properties and functionality at competitive prices.

We put all our knowhow and experience in ensuring our customers an easy integration and stability in their products and production.

From our sales offices and inventories in Denmark, France and the UK we are able to supply our core markets and customers within days.

Our core competency is components for High Frequency welding, with a special focus on valves, eyelets and components for medical bags. We maintain PVC as a special focus, however deliver 50% of our turnover in other plastic materials.

Our four main business areas are:

Technical Components Medical Components Modular storage boxes Product Development Services

Weldable eyelets and fittings

Valves for inflating, over pressure and vacuum

Threaded nozzles and caps

HF/RF welding machines

Market leader in drainage valves, connectors and fittings for medical bags

Customization and OEM production

Modular, high quality transparent boxes

Approved for storage of food and fragile objects

Sold under the brand UltraPlast

Product design and realisation

Pilot production, test and documentation

Ramp-up and production

In addition to above, our main manufacturing strength is quality injection moulding in all technical
plastics - including PVC. Carmo PVC products are made in a number of different PVC grades - all special and protected Carmo recipes.

We can manufacture in cleanroom down to class 10.000.
2K moulding

We have chosen quality to be the keyword for our production and
distribution. Since 1993 Carmo has been holding an ISO certification and we are today ISO certified according to ISO 9001:2008.

Carmo