Home Home > Products > Grommets & Eyelets > Eyelets Oval and Square > 04-134

04-134 - Oval PVC Eyelet, 6/27 mm

Oval PVC Eyelet, 6/27 mm. Oval PVC eyelet with square shoulders for HF welding onto banners, tarpaulins, building wraps etc. 6x27 mm hole.

Click for larger picture

Small technical drawing of 04-134 Oval PVC Eyelet, 6/27 mm

Nominal measurements in mm

 

Oval PVC eyelet with square shoulders and 6x27 mm elongated hole. Typically used for hole reinforcements in banners, tarpaulins, building wraps etc. HF Welded PVC eyelets will fuse together with the foil and result in a joint that is significantly stronger and can withstand significantly higher pull forces than metal eyelet. This is especially true when working in mesh materials. PVC eyelets will not tear out and will not rust and stain the material. They can be colour matched to the fabric and will make recycling of PVC and vinyl banners much easier.

Welding times of 1.5 seconds for single eyelets and 2-3 seconds for double eyelets are typical - depending on the HF generator used and the thickness and layers of sheets to weld.

Can be HF welded using our electrode 07-402-0120

  • Material and geometry optimized for High Frequency (HF) welding
  • Match or surpass metal grommets in pull strength
  • Can be color matched to the material
  • Avoid strains and rust
  • Allows easy recycling of vinyl and PVC banners, tarps etc. once ready for disposal

Download Productsheet
Download full catalog
Order# Material Color From stock Standard Pack Proper-
ties
Use Comments
04-134-1007 PVC
Army
Produced to order - Call for quote
4 x 3.000
ShoreA > 90
Ultrasonic weldable
High Frequency (HF) weldable
Gluable using Carmo Seal
04-134-1004 PVC
Natural
Produced to order - Call for quote
4 x 3.000
ShoreA > 90
Ultrasonic weldable
High Frequency (HF) weldable
Gluable using Carmo Seal








mounts with:
Standalone
Standalone electrodes Standalone electrodes
Standalone electrodes
related products
04-204 04-205 04-206 04-403
PVC Eyelet Oval, 9/42 mm PVC Eyelet Oval, 9/42 mm
PVC Eyelet Oval, 9/42 mm
Square plastic Eyelet, 24/43 mm Square plastic Eyelet, 24/43 mm
Square plastic Eyelet, 24/43 mm
Oval plastic Eyelet, Oval, 13/51 mm Oval plastic Eyelet, Oval, 13/51 mm
Oval plastic Eyelet, Oval, 13/51 mm
Oval plastic eyelet,20/40 mm Oval plastic eyelet,20/40 mm
Oval plastic eyelet,20/40 mm
Customers also buy
04-512 05-441
Plastic snap grommet Set, Ø12 mm Plastic snap grommet Set, Ø12 mm
Plastic snap grommet Set, Ø12 mm
Plastic Cleat for webbing, 26/4 mm Plastic Cleat for webbing, 26/4 mm
Plastic Cleat for webbing, 26/4 mm

All measurements and drawings are nominal. For exact measurements - and for critical integration - please contact sales for detailed drawings. Carmo is not responsible for misprints and technical changes.


(*) Smaller quantities can be delivered on request for a repacking fee.

 

Related Products

Snap Grommets
Eyelets, Round
Punch & welding eyelet machines
Eyelet setter tool

 


Contact sales

Søren Keller
Tel.: +45 49 12 21 00
Fax: +45 49 12 21 99

... or send a request now!


Sign up to our newsletter
Case
Carmo Eyelets used for mounting ventilation ducts in mining

Carmo Eyelets used for mounting ventilation ducts

Case
Plastic eyelets from Carmo used in building wrap project in Hong Kong

Building wrap project, Hong Kong, using Carmo eyelets.

Customer story
Carmo Eyelets used for high performance maritime equipment by Norwegian Nofi

Maritime equipment

"Carmo's components deliver the exact standard we are looking for"- NOFI Tromsø AS

Read more …
Customer story
Eyelets used for tens and awnings

Eyelets used for tents and awnings

"For 40 years Carmo has delivered quality and punctuality" - Isabella A/S

Read more…
 
 
 
 

Carmo has a 60 year track record of delivering highly specialized technical and medical components.

We design, produce and sell quality injection moulded plastic components globally. We service industries as diverse as Medico, Maritime, Mining, Agriculture and Automotive.

Quality, Service and Flexibility are the key words of our production and in all aspects of our interaction with our customers. We are focused on minimizing hassle and maximizing service, while helping our customers turning ideas into products.

We are based in Denmark and run a highly automated production. By leveraging robotics and vision technology, we are able to deliver components with very high quality, well-defined properties and functionality at competitive prices.

We put all our knowhow and experience in ensuring our customers an easy integration and stability in their products and production.

From our sales offices and inventories in Denmark, France and the UK we are able to supply our core markets and customers within days.

Our core competency is components for High Frequency welding, with a special focus on valves, eyelets and components for medical bags. We maintain PVC as a special focus, however deliver 50% of our turnover in other plastic materials.

Our four main business areas are:

Technical Components Medical Components Modular storage boxes Product Development Services

Weldable eyelets and fittings

Valves for inflating, over pressure and vacuum

Threaded nozzles and caps

HF/RF welding machines

Market leader in drainage valves, connectors and fittings for medical bags

Customization and OEM production

Modular, high quality transparent boxes

Approved for storage of food and fragile objects

Sold under the brand UltraPlast

Product design and realisation

Pilot production, test and documentation

Ramp-up and production

In addition to above, our main manufacturing strength is quality injection moulding in all technical
plastics - including PVC. Carmo PVC products are made in a number of different PVC grades - all special and protected Carmo recipes.

We can manufacture in cleanroom down to class 10.000.
2K moulding

We have chosen quality to be the keyword for our production and
distribution. Since 1993 Carmo has been holding an ISO certification and we are today ISO certified according to ISO 9001:2008.

Carmo